Enhanced Ruiz criterion for the evaluation of crack initiation in contact subjected to fretting fatigue

The fatigue-fretting damage parameter (FFDP) introduced by Ruiz is comprehensively discussed in this paper. Shortcomings and limitations of this criterion are presented resulting in a combined energetic-multiaxial enhancement (eFFDP). Specific frictional power was supposed to control the fretting damage and the critical plane approach is used to solve the multiaxial stress state in the fretting contact. The significance of the eFFDP is evaluated for the key–shaft–hub connection under combined torque and bend loading. Applying the analysis to recent fatigue tests, a comparison of stress and fretting parameters is made for different loading conditions including estimation of the fretting fatigue limit.     

Wrinkling of corrugated skin sandwich panels

Compression wrinkling of composite sandwich panels with corrugated skins was investigated numerically, analytically and experimentally. Semi-circular and sine-wave shaped corrugations were studied. The corrugations significantly increased wrinkling strength when compared with equal mass flat panels. Semi-circular corrugations proved to be highly preferable to sine-wave shaped corrugations due to localized buckling in the latter. Over 40 fiberglass and foam core sandwich specimens were manufactured with semi-circular skin corrugations. These specimens were tested to failure, providing confirmation of the numerical and analytical results.     

Fluidised pellet bed bioreactor: a promising technology for onsite wastewater treatment and reuse.

A pilot-scale fluidised pellet bed (FPB) bioreactor, which combines chemical coagulation, biological degradation, particle pelletisation and separation in one unit, was applied for onsite wastewater treatment and reuse. As a result of rational use of inorganic coagulant and organic polymer and moderate mechanical agitation, spherical particles were generated in the upflow column and a well-fluidised bed was formed. With a continuous supply of dissolved oxygen through a recycling loop, an aerobic condition was kept in the bottom section of the FPB column. Under such conditions the pellets in the FPB column showed the following characteristics: (1) compact structure and high density; (2) rich in microorganisms; and (3) high MLSS and MLVSS concentrations. Therefore, the FPB bioreactor achieved more than 90% removal of SS, COD, BOD and TP from raw domestic wastewater within a total hydraulic retention time (HRT) of only about 30 minutes. It also showed nitrification and denitrification ability and the TN removal could be about 50% as the recycling ratio was increased to 1:1. The treated water quality is generally competitive with the secondary effluent from a conventional activated sludge process. With these advantages the FPB bioreactor is recommendable as a compact system for onsite wastewater treatment and reuse.     

Estimation of zone effective-volume using tracer-gas techniques

The concentration-decay and pulse-injection tracer-gas techniques were used to evaluate the effective volume of a zone. Measurements of airflow rates were carried out in an environmental chamber using SF₆ as the tracer gas. Results showed that the flow rate estimated from the concentration-decay technique is about 4·5–14·3% higher than actual flow rate if the effective volume of the chamber is assumed to be equal to the physical volume. The effective volume, estimated from tracer-gas measurements, was found to be about 1·5–2·7% higher than the physical volume of the chamber.     

处理器验证激励在线筛选技术

如何生成高质量的验证激励是功能验证中的核心问题之一.随着功能验证的不断进行,验证激励的有效性也随之降低.为了提高验证激励的质量,提出一种在线筛选技术来处理验证激励.该技术采用单分类支持向量机来在线地构建分类器,以对新生成的验证激励是否冗余进行预测,如果是冗余的,则不进入仿真阶段进行仿真.在此基础上,进一步提出指令序列核函数来衡量不同指令序列的相似程度.实验结果表明,与约束随机生成技术相比,文中技术可以减少约83%的验证激励及79%的验证时间.